Cal Fire Radio Requirements

The CAL FIRE website contains excerpts from the policies, procedures and payment rates used by CAL FIRE. These guidelines set out the conditions for entering into an Emergency Equipment Lease Agreement (EERA) with CAL FIRE. These terms and conditions reflect cal fire`s business requirements and, as such, they are CAL FIRE`s business rules. These policies, procedures and tariffs are not laws or regulations, although in some cases they reflect the requirements of applicable laws and regulations. Each ECC program has a name on the radio, the city where the ECC is located. This allows you to determine the local network you are listening to. St. Helena is the city where the ECC is located and the headquarters of Unit 14, Lake/Napa Unit. All firefighters will call „St. Helena” over-the-air to contact this ECC.

Emergency Command Centers (ECCs) are the voice of CALFIRE Radio. Dispatchers retain radio control over all different incidents in their respective units. Other agencies that work well with CALFIRE are often sent by the ECC. District and city firefighters as well as ambulances can be sent directly along CALFIRE resources in the local network. This can make things very busy on the local network, but agencies all benefit from sharing the same information while responding to the same incident. The ECC is also the frequency coordinator of the unit. They will establish tactical frequencies for an incident that needs them. You will also find tactical aerial frequencies (Victor nets) that can be used by the FAA, etc.

when the normal frequencies are all exhausted. Air attack networks These frequencies are tactical FM networks for state firefighters. Different areas have an initial air tactic that they prefer, such as Air Tactics 5 for the upper Sac Valley. Each aircraft en route to a fire during the first attack reports via this frequency as soon as it enters the air. Once there, they will coordinate their extinguishing work via this frequency. Air to Ground is used for aircraft to communicate with ground resources for some reason. Click here to learn more about how to monitor firefighting from the air. No entrepreneur is guaranteed a certain volume of business resulting from the conclusion of an EERA with CAL FIRE. CAL FIRE uses established policies to distribute orders for firefighting and support equipment.

The goal of these guidelines is to maintain fair business practices and distribute orders to as many suppliers as possible, while using government taxpayers` money to account for the tax liability. Local Net`s CALFIRE Dispatch repeater system is called „Local Net”, a term that dates back to the early 60s and 70s of the CDF radio system. Statewide, Local Net refers to the frequency that the unit`s ECC uses for daily radio traffic, including scheduling. Each unit has a series of repeaters, each covering specific geographic areas of the unit. Each repeater is activated by a different CTCSS sound. A fire truck that wants to talk to Local Net selects the repeater with the best coverage. They change the repeater by changing the „sounds”. Tactical network Once units are at the scene of an incident, they switch to a tactical channel (Tac Net) for on-site communication. CALFIRE Tact 1 to 12 are used throughout the state (13 to 23 are used as input channels for CDF repeaters and are only used for emergency overflows). Tactical traffic is simplex (radio to radio, not a repeater). This means you`ll only hear tactical traffic in your area. Due to the constant recycling of CALFIRE FM frequencies, you can hear other local networks while trying to hear tactical traffic, especially with a large outdoor antenna or with any elevation outside the valley floor.

Starting with the 2011 fire season, all Tac nets should be on 192.8 sound, which should help hear incidents remotely without interfering with local networks. As a fire grows, more tactical frequencies are assigned to the incident. Some counties and areas of operation have begun using locally licensed transponders for county command networks for their own use outside of state-authorized command networks. These county command networks can be used to extend state command coverage in the area or expand the use of the local network, where dispatch takes place on the local network, but response verification and incident control in the county command network. These frequencies are usually listed in local frequency resources and not necessarily in CALFIRE frequency lists. The recycled frequencies of CALFIRE frequencies are reused throughout the state. The local network in one county could be a tactical network two counties away, and still a command net elsewhere. For this reason, CTCSS tones are essential to minimize interference between shared frequencies. While it`s ingenious to save money and frequency resources, calfire makes it difficult to monitor with a high-gain or high-altitude antenna. Since sounds are not fully used in tactical networks, you can switch to a high-gain antenna to hear tactical traffic remotely, only to bring the remote LAN with the same frequency. The rotation list has been removed and if you have any questions, please contact your local rented equipment coordinator.