New cars sold in the U.S. must be equipped with rearview cameras to help drivers avoid crashes under a federal regulation that went into effect Wednesday. The short answer is no, you won`t. Currently, there are no car insurance discounts for a rearview camera. If you`re buying a new vehicle and it doesn`t have a rearview camera or the feature costs more, it was built before Tuesday, May 1, 2018. At that time, the safety device became standard on all vehicles manufactured for the American market. The standardization is part of a 2014 U.S. Department of Transportation (DOT) regulation, though Peter Kurdock, deputy general counsel at Advocates for Highway & Auto Safety, said efforts to make backup cameras the norm began when George W. Bush was president. „It literally took us 10 years to get them into the cars,” Kurdock told Car and Driver. Another breakthrough in the field of backup cameras has significantly reduced the number of reversing accidents by combining this technology with automatic rear braking systems.
Although this option is only present in approximately 5% of new vehicles, this combined technology has already been shown to significantly reduce backup incidents by 78%4. Two specific car models that have used this new common technology system are the 2017 Subaru Outback and the 2017 Cadillac XT5 SUV. Just as rearview cameras are now a baseline requirement for all new vehicles, it is expected that by 2022, all new vehicles will also be equipped with automatic braking systems at the front. 19. The 30. In June 2016, in response to the Alliance/Tesla petition, NHTSA sent a letter to the two petitioners requesting additional information to help the agency evaluate the petition. The safety questions posed in the letter focused on human factors information gaps and performance concerns, and sought feedback on performance requirements and details of test procedures that would be required to ensure that camera systems provide a level of safety equivalent to that of standard mirrors. NHTSA notes that since the Agency did not receive a complete response to this letter from any of the petitioners, many of the questions in this NPRA are based on the questions in this letter. Rearview cameras have been regulated by law in Canada and the United States since 2018. This measure is not subject to the requirements of E.O. 13771 (82 FR 9339, 3. February 2017), as it is a pre-announcement of the proposed rule-making.
The law set a legal deadline of February 2011 for the adoption of the final regulation. Under the Obama administration, however, the USDOT repeatedly granted itself time extensions, saying it needed more time to analyze the costs and benefits of the request. [18] In September 2013, Greg Gulbransen, the father of the child who gave his name to the law, along with a group of consumers and lawyers, filed a petition in the Second Circuit Court of Appeals demanding that the USDOT implement the rearview camera regulations within 90 days. [19] Approximately half of the 2012 model year automobiles were equipped with rearview cameras. [17] [20] The purpose of mandatory rearview cameras is to save the lives of children and the elderly in particular. (19) Although not one of the main safety objectives of mirrors, drivers often use exterior mirrors after turning off the ignition and preparing to exit the vehicle to determine whether it is safe to open the vehicle door when parked next to a lane. We are seeking comment on whether NHTSA considers that a CMS should be able to perform this function by being operational in any capacity, at any time or for a specified period of time after opening the driver`s car door. What new performance criteria should be developed for this purpose, and what has been done to develop these criteria? (7) We ask for feedback on the minimum image quality displayed on a CMS electronic visual display for the same level of security as the conventional FMVSS number.
Mirrors conform to the 111 standard, as well as how image quality can be measured objectively. In particular, we ask for feedback on the appropriate minimum settings for camera and visual display and performance metrics for a CMS (i.e. camera/screen resolution, screen brightness, contrast, color, sound and their settings). Should the parameters and measurements of a CMS differ from those of a rearview camera system and, if so, how and to what extent? To what extent do existing CMS regulations (e.g. ISO 16505/UNECE R46) objective and reproducible performance requirements and test methods to assess image quality? What amendments or additions would need to be made if these regulations do not provide for such requirements and procedures? What new methods, if any, would be needed to adequately assess image quality, and what has been done to develop such methods? Other types of camera systems can provide a more complete overview. The Japanese Lexus ES market, which was first offered in October 2018, can be optionally equipped with cameras as side mirrors. [11] NHTSA is issuing this ANPRM to gather information and obtain feedback so that the Agency can decide whether (and if so, how) to amend FMVSS No. 111, „Rear view” to allow camera-equipped reversing systems (commonly referred to as „camera surveillance systems” or „CMS” [1]) as an alternative compliance option to exterior mirrors or instead of all mirrors, both inside and out. In particular, NHTSA hopes that this ANPRM will provide the Agency with additional safety-related research and data through the public comment process to support the eventual development of future rules on this issue. (6) NHTSA examined whether it was possible to combine the cameras or screens of the CMS with the camera required by FMVSS No 111 or the display of the rearview camera system.
The Agency provisionally concludes that no such possibilities exist. While SMD and rearview camera systems likely work in the same way, the systems serve different security purposes and are used under different circumstances. In particular, the purpose of a CMS is to help the driver avoid all accidents during normal driving, while the purpose of a rearview camera is to help the driver avoid accidents while reversing. Perhaps more importantly, given the likely differences between the image quality settings for field of view and display image quality that would apply to CMS and rearview camera systems, NHTSA considers it unlikely that it is technically possible to combine the two systems to share a camera or display monitor. [40] NHTSA is seeking comment on this preliminary conclusion. The rear-view mirror, mounted on the ceiling above the center of a vehicle`s windshield, offers the driver a useful way to monitor their external environment. Despite its usefulness, mirror technology has not evolved much in recent decades, except for the additional anti-glare functions activated by adjusting the angle of the mirror. The Rearview Cameras Act came into force in May 2018 and requires every new vehicle to be equipped with a rearview camera and video screen. This means that even the cheapest vehicles on the market must now be equipped with reversing cameras. In 2007, Nissan introduced its „Around View Monitor” for the 2008 Infiniti EX35, which uses four cameras to get an overview of the vehicle. [8] [9] BMW introduced its competing system called Surround View for the 5 Series F10 in 2009.
[10] Other automakers have since offered similar systems, and in 2011 Toyota introduced Panoramic View Monitor in a 2012 Alphard and Vellfire. On March 31, 2014, the U.S. Department of Transportation (USDOT) and the National Highway Traffic Safety Administration (NHTSA) stated that by May 1, 2018, all cars, SUVs, trucks, and vans must have consideration systems. This announcement follows calls from thousands of people affected by tragic accidents, especially those involving children and the elderly. In fact, a 2010 NHTSA report indicates that in the United States, 210 people die each year from relief incidents and another 15,000 are injured. About 31% of these victims involve children under the age of 5, while 26% kill adults over the age of 702. In addition to the government-funded research described above, NHTSA is aware of two other studies that examined relevant issues related to the placement of rearview screens. The first is a naturalistic study by Ali and Bazilah, published in 2014, in which researchers observed the driving behavior of subjects on the road who used vehicles equipped only with SMD and without mirrors. [36 37] The study found that using CMS in the study improved drivers` attention in the front lane, but increased off-road downward views of the central reverse display and motion sickness, prompting the authors to recommend not using a low location for a reverse display. In 2016, Large et al.
published a similar study based on observations of subjects who used a driving simulator of a vehicle equipped with a CMS. The researchers analyzed instantaneous behavior and subjective driver feedback for five configurations of three vehicle displays (one reversing display and two side displays) compared to traditional mirrors during overtaking maneuvers performed without emergency. [38] The study found that subjects tended to prefer a SMD display layout that matched traditional mirror positions.